|yellow/black, yellow/red, fluorescent yellow-green/black, etc
|Self adhesive; Aluminum plate
|400mm x 300mm; 300mm x 300mm; 300mm x 100mm; Customizable
|PVC, PET, PC, PMMA(Acrylic)
|3-10 years(Varies by material)
|High Visibility, Weather Resistant, Waterproof, Easy to install
|Class 1, AS4001.1, VSB12, AS/NZS 1906.1, Class 1W, ECE70.01, BS AU 152, AS4001.2 - 2003, Class 400, dnotv, etc
All heavy goods vehicles (trucks and trailers) must be fitted with rear marking plates by local traffic regulations. For vehicles that require crossing a lane or turning from an adjacent lane to make a left or right turn at an intersection, a “Do Not Overtake” sign must be installed on the rear of the vehicle.
FLIGHT has more than 15 years of experience in customizing vehicle rear marking plates, providing you with one-stop customized do not overtake turning vehicle signs that comply with Class 1A, Class 400, or UNECE R70 standards.
Do Not Overtake Turning Vehicle Sign has two types: “One Piece” or “Two Piece”. This will mainly depend on the size of your HGV and relevant local regulations. FLIGHT provides one-stop customized services based on your application.
In Australia, do not overtake turning vehicle signs come in many different sizes. Such as 31L(300mm x 100mm), 33L(300mm x 300mm), 33(Left: 300mm x 300mm; right: 300mm x 300mm), and 34 (Left: 300mm x 400mm; right: 300mm x 400mm). Contact us to customize the size type to fit your HGV application.
Common do not overtake turning vehicle signs are aluminum plate types, that can be attached mechanically. At the same time, you can also choose a self-adhesive type of do not overtake turning vehicle sticker, which is easier to install.
FLIGHT is China's leading do not overtake sign custom processing supplier, and we have served customers in more than 30 countries, including Australia, the United Kingdom, the United States, and other countries.
Contact us for one-stop customized purchasing service for your Do Not Overtake Turning Vehicle Signs.
Common do not overtake turning vehicle signs and stickers include Category 31L, Category 33L, Category 33, and Category 34.
Category 31L: 300mm x 100mm
Category 33L: 300mm x 300m
Category 33: Left 300mm x 300mm and Right 300mm x 300mm
Category 34: Left 300mm x 400mm and Right 300mm x 400m
In addition to this, if you are in the Australian state of New South Wales, it requires that the dimensions of the do not overtake sign be 400mm x 400mm and that the height of the text on the sign be at least 50mm.
For vehicles or combinations of 7.5 meters or more in length that must cross a lane or turn from an adjacent lane to turn left or right at an intersection, the vehicle must be fitted with a "do not overtake turning vehicle" sign.
For any motor vehicle with a GVM of less than 12 tonnes and any trailer with a GVM of less than 10 tonnes then you may choose to install a "Do Not Overtake" sign
1) Maximum of 500mm space from each side of vehicle
2) Maximum of 2000mm gap from ground to bottom of sign
The "no overtaking turning vehicle" rule is a fundamental road safety principle that applies to all drivers. It requires that vehicles of all types behind must not drive past or overtake a vehicle with a no overtaking turning vehicle sign.
At an intersection, if a "Do Not Overtake" sign is installed on the rear of the vehicle in front, the vehicle traveling behind is not allowed to pass or overtake the vehicle in front.
This is because the turning vehicle may need to pass through the lane and swing out to complete the turn, putting you at risk of a collision if you are next to it.