Traffic Reflective Solutions - FLIGHT

Custom Wholesale DOT Reflective Tape Suppliers And Manufacturers

FLIGHT has over 10 years of experience in custom fabrication services to provide you with reflective tape for trailers and trucks that meet DOT C2 requirements

  • DOT C2 and ISO9001 certified factory
  • Provides custom design options
  • Cost-effective products
  • Low MOQ

    Submit Your Request

    DOT Reflective Tape For Trailers And Trucks

    FLIGHT is a professional manufacturer and supplier of DOT reflective tape. DOT C2 and ECE 104 certified to ensure that we supply trailer and truck reflective tape to the Americas and European countries in compliance with local regulations.

    FLIGHT is a supplier of various DOT reflective tapes according to your requirements. The most commonly used types of DOT tapes are 7″ white / 11″ red and 6″ white / 6″ red. Send us your ideal DOT conspicuity tape request and we will be happy to meet all your conspicuity tape needs.

    As one of the leading DOT reflective tape suppliers in China, FLIGHT has been manufacturing vehicle reflective tape for more than 10 years. Whether you need grade DOT C2, C3, or C4 types, or you want to custom process DOT reflective tapes such as logo printing, edge sealing, kiss cutting, DOT SAE, etc., FLIGHT always has the best solution for you. Just send us your detailed requirements and get an instant quote.

    DOT C2 reflective tape is the most popular and cost efficient size of DOT reflective tape (it is 2 inches wide). It is a must-have vehicle conspicuity marking in the United States and other countries in the Americas to improve traffic safety.
    In addition to DOT reflective tape roll, we can also customize red and white reflective strips for you. it has two patterns for you to choose from, which are 7″ white / 11″ red and 6″ white / 6″ red.
    Send Inquiry Now

    Red and White Reflective Strips

    DOT certified tapes can be divided into C2,C3,C4 according to width, they represent 2″, 3″ and 4″ width respectively. For large trailers and trucks, the width type of DOT C3 and C4 reflective tape will be more beneficial to improve the high visibility of the vehicle.
    Send Inquiry Now

    DOT C3 Reflective Tape

    Easy to install DOT SAE reflective sticker rolls are also popular with users. We can customize your rolls of high-visibility reflective stickers marked SAE A DOT.
    Send Inquiry Now

    DOT SAE Reflective Tape

    Still not find the DOT reflective tape you need?

    Contact our consultants for more available products.

      Submit Your Request

      Full Solutions From DOT Reflective Tape Manufacturers

      At FLIGHT, we manufacture custom DOT reflective tapes that can meet almost all of your requirements.

      DOT Reflective Tape Material

      According to the type of retroreflective sheeting material, we can provide you with DOT reflective tapes of many different materials, such as PET, PC, PMMA.

      DOT Reflective Tape Size

      2" wide DOT reflective tape is the most popular and cost-effective size width, it is also known as DOT C2 reflective tape. We can also customize 3-inch and 4-inch wide types for you, they are DOT C3 and C4 types respectively.

      DOT Reflective Tape Color

      A 7″ white / 11″ red and a 6″ white / 6″ red are the most common colors of DOT reflective tape. Besides, we can also customize solid color DOT conspicuity tape for you, such as white, yellow, red, lemon yellow, etc.

      Customized Processing Technology

      In order to meet various application requirements, we can provide you with custom printing logo, pre-cut, edge sealing and other custom processing services.

      Custom Retroreflective Types

      Glass beads, microprisms, and metalized prismatic are 3 common types of DOT reflective tape. Provide the best solution for your application.

      Customized Packaging

      In addition to customizing the DOT reflective tape, we can also provide you with custom packaging services, making it possible for your one-stop shopping.

        Submit Your Request

        What is DOT Reflective Tape?

        DOT reflective tape is formulated by FMCSA and issued by the National Highway Traffic Safety Administration (NHTSA) for the conspicuity marking of vehicles.

        It requires trucks and trailers with a gross weight rating (GVWR) over 10,000 pounds and a width over 80 inches to be marked with DOT C2-approved reflective tape for high visibility at night, effectively reducing traffic accidents.

        Choose FLIGHT as your preferred custom DOT C2 reflective tape manufacturer and supplier!

        What is DOT Reflective Tape
        What is DOT Reflective Tape Requirements

        What is DOT Reflective Tape Requirements?

        For a reflective tape to meet DOT requirements, it must meet certain requirements. These requirements include the tape color, width, alternate color spacing, performance and reflectivity, and DOT certification logo.

        Color – DOT tape must be made of alternating colors of red and white.

        Width – DOT certified tapes can be 2″ wide, 3″ wide or 4″ wide. They stand for DOT C2, C3, and C4, respectively.

        Spacing – 7 ” white / 11″ red and a 6″ white / 6″ red.

        Performance and Reflectivity – DOT reflective tape must meet all performance requirements of ASTM D4956-90 Type V sheets. These requirements include adhesion, color fastness, flexibility, shrinkage, weather resistance, etc. Also reflectivity must meet the requirements of DOT C2 certification.

        DOT certification logo – The DOT-C2 logo appears on the tape at least once every 12 inches and the characters should be at least 3 mm high

          Submit Your Request

          What Is DOT Approved Reflective Tape?

          DOT approved reflective tape must meet all requirements for DOT certification. It not only includes the requirements for the width, color, spacing and other aspects of the reflective tape, but also clearly defines the minimum reflectivity requirements for DOT C2, C3, and C4.

          The following table records the minimum coefficient of retroreflection for each segment of red or white sheeting for DOT C2, C3, and C4 grades. (Unit: Candela/Lux/㎡)

          DOT Reflective Tape Grade
          Entrance Angle
          0.2° Obs. Angle
          0.5° Obs. Angle
          White
          Red
          White
          Red
          C2
          - 4°
          250
          60
          65
          15
          C2
          30°
          250
          60
          65
          15
          C2
          45°
          60
          15
          15
          4
          C3
          - 4°
          165
          40
          43
          10
          C3
          30°
          165
          40
          43
          10
          C3
          45°
          40
          10
          10
          3
          C4
          - 4°
          125
          30
          33
          8
          C4
          30°
          125
          30
          33
          8
          C4
          45°
          30
          8
          8
          2

          Where To Put Reflective Tape On Trailers?

          The regulation from the Department of Transportation (DOT) on conspicuity material, referred to as DOT C2. It not only specifies the requirements of DOT reflective tape, but also specifies the application location of DOT conspicuity tape on trailers and trucks.

          Sides Area – DOT reflective tape should be applied on both sides of trailers and trucks with more than 50% coverage on each side.

          Lower Rear Area – DOT reflective tape must also be applied to the rear of every trailer and truck and cover the entire width of the vehicle.

          Upper Rear Area – Two pairs of DOT white reflective tape arrays, each pair at least 300 mm (12 inches) long, must be positioned horizontally and vertically on the right and left upper corners of the rear of the body of each trailer and semitrailer, as close as practicable to the top of the trailer and as far apart as practicable.

          How To Apply DOT Reflective Tape?

          Correct use of DOT reflective tape is a prerequisite for improving its durability.

          • Choose a good operating environment:
            Please choose an environment with a relative humidity of 30~60%, and control the temperature between 50°-97°F (10°-36°C).
          • Wipe the application surface:
            Wipe off dust and stains from the application surface to ensure that the reflective tape is securely fastened to the vehicle.
          • Apply the reflective tape:
            When we have completed the first two steps, we can apply our reflective tape to the application surface and press the reflective tape with a silicone spatula until the installation is complete.
          How To Apply DOT Reflective Tape
          How To Remove DOT Reflective Tape

          How To Remove DOT Reflective Tape?

          Proper removal of reflective tape from a vehicle not only ensures that the vehicle is not scratched but also ensures that the vehicle can be reapplied with new reflective tape.

          • Prepare scraper and alcohol solvent:
            Before removing the DOT reflective tape, you must prepare the relevant tools
          • First remove the surface reflective layer:
            You need to remove the surface layer of the reflective tape first.
          • Remove the adhesive:
            When the surface of the reflective tape is clean, we spray an alcohol-based solvent onto the adhesive residue. After soaking for 2-3 minutes, use a spatula to remove adhesive residue until clean

          Applications for DOT Reflective Tape Roll

          According to the National Highway Traffic Safety Administration (NHTSA) regulations for conspicuity materials. All trailers, tankers, commercial vehicles, utility vehicles, dump trucks, semi truck, semi-trailers with a gross vehicle weight rating (GVWR) greater than 10,000 pounds with a gross width of 80 inches or more must have DOT red and white conspicuity markings installed. Besides that, DOT red and white reflective tape is widely used in other locations such as mailboxes, trash cans, rail gate arm(RGA), utility poles, farms, etc.

          DOT C2 Reflective Tape For Trailers

          DOT C2 Reflective Tape For Trailers

          DOT C2 Reflective Tape For Truck

          Reflective Tape For Rail Gate Arm

          Reflective Tape For Rail Gate Arm

          Want FLIGHT to Produce Custom DOT Reflective Tape For You?

          FLIGHT not only provides you with DOT C2 compliant vehicle reflective tapes, but also can provide you with customized services. Such as custom printing logo, custom cutting, custom edge sealing, custom packaging and other services.

          Custom Printed Logo – Printing your company’s logo on DOT C2 reflective tape is good for increasing your company’s visibility.

          Custom Cutting – FLIGHT can also custom kiss cut and die cut DOT reflective tape roll for you.

          Custom Edge Sealing – Edge sealing will benefit the durability of DOT C2 reflective tape.

          Custom Packaging – We can also provide you with custom packaging services.

            Submit Your Request

            DOT C2 Certificate

            Certificates Guarantee Our Strength

            As one of the professional DOT reflective tape suppliers and manufacturers, FLIGHT is DOT C2 certified and can provide you with NHTSA compliant DOT C2 reflective tape.

            DOT C2 certified conspicuity tapes are generally available in two types. A 7″ White/11″ Red and a 6″ White/6″ Red. Besides, FLIGHT can also customize solid color DOT C2 reflective tape for you, such as white, red, fluorescent yellow-green DOT C2 reflective tape.

            Would you like to custom print your company logo on DOT C2 compliant reflective tape? Contact us for your customized service.

            Your Order Process

            Step 1:  Send us your requirement
            Send us your specific requirements or specific applications of DOT reflective tape.

            Step 2: Confirm order details
            We will confirm the order details with you within 8 working hours.

            Step 3: Place an order
            We make PI for you to check and pay deposit. 

            Step 4: Order production
            Our warehouse usually has some regular products in stock, if so, the delivery time is 1-3 days after payment.

            Step 5: Quality check and Shipment
            We do quality & quantity check before the packaging and choose the type of logistics according to your requirements.

            NOTE : Or we make samples for you to check first.

              Submit Your Request

              Listen to What Our Clients Say about Our Products Quality and Services

              Other Hot Reflective Products You May Interested

              DOT reflective tape is mainly used in the United States and some countries in the Americas. We also provide you with other types of reflective tapes for vehicles to ensure your legal application. For example ECE 104 reflective tape, SASO 2913 reflective tape, Chevron reflective tape, etc. In addition, we can also customize all kinds of reflective tape rolls, reflective stickers/decals, reflective belt, and other traffic reflective products for you. Contact Us Now!